SOME COMPONENTS TO GO WITH YOUR CUSTOM TITANIUM FRAME
Part of our philosophy at Setavento is to stick to what we are good at - designing and making custom titanium bicycle frames. This is where we put our energy. But what happens if you need a complete bike?
Many of our customers like the convenience of building a bike themselves, which can be very cost effective if you already have most of the components. Alternatively you can have the bike built by your local bicycle shop. If you're not sure who to go to, we would be happy to recommend a specialist shop near you, and to liaise with them if you need advise for the build.
For reasons of tradition and convenience we offer a limited range of forks and headsets which we can install for you. We also stock a few products which we believe represent excellent quality at a reasonable price, and which we use ourselves.
Please note that our component prices are somewhat below what you would normally expect to pay. However, as we have special Original Equipment Manufacturer (OEM) status with our suppliers we can only supply components to frame customers.
CHOOSE YOUR COMPONENTS:
Forks
Reynolds
Ouzo Pro
Summary:
1 1/8th carbon 285mm steerer tube, carbon crown, 43mm rake. A good fork is a fork you don't notice. Stiff and reliable, the Reynolds Ouzo Pro is a pro level carbon fibre fork for all types of racing. It is our favourite fork for riders of 65kgs and over.
1 1/8th, for integrated headsets only, 113g. Total Stack Height 8mm.
The ZeroStack design uses low profile CNC machined aluminum bearing cups set into the head tube. A far better solution than mounting the bearings directly against the headtube. The Cane Creek's ZeroStack design is compatible with Setavento integrated titanium head tubes. The ZS-6 has an integrated rubber seal, and uses stainless steel bearings for extended durability.
£64.95
(RRP £84.99) High quality integrated headset which uses bearing cups.
Headset
Cane Creek
S-8
1 1/8th, for non-integrated headsets, 112g. Total Stack Height 27.4mm.
The S-8 headset features replaceable stainless steel bearings and a light, compact profile. The S-8’s overhanging cup/cover design keeps contaminants from reaching the stainless steel bearings, and is repeated with the lower cup/crown race which has an integrated rubber seal.
A superb high strength, lightweight, properly engineered seatpost. No other seatpost we've seen comes close to the excellence of the Thomson seatpost. 27.2mm x 330mm. Other sizes available.
